Leads4pass Best Exam Dumps Training Resources Free Update

High quality Cisco ICND2 200-105 dumps exam questions and answers download free try. Get the best Cisco ICND2 200-105 dumps pdf training materials and dumps vce youtube demo free update. https://www.leads4pass.com/200-105.html dumps exam training resources. Latest Cisco ICND2 200-105 dumps pdf practice files and study guides, 100% success and guarantee to pass Cisco 200-105 exam test easily.

High quality Cisco 200-105 dumps pdf practice questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRS3BsT2duT3pTSlU

High quality Cisco 210-065 dumps pdf practice questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRODRqVmVBYWxuc0k

Vendor: Cisco
Certifications: ICND2
Exam Name: Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)
Exam Code: 200-105
Total Questions: 204 Q&As

QUESTION 1
A user wants to use the One Button to Push feature on a Cisco TelePresence System 500- 32 video endpoint. Which configuration tool should be used to allow the One Button to Push feature to work?
A. Cisco Unified Communications Manager server, phones, devices, One Button to Push
B. Cisco Gigaswitch Router, Call Manager Express, One Button to Push
C. Cisco TelePresence Manager Suite server, new conference, set Conference type to One Button to Push
D. Active Directory server, users, new conference, One Button to Push
E. Cisco TelePresence Video Communication Server, new conference, calls, One Button to Push
Correct Answer: C

QUESTION 2
Which scheduling and management application can be installed on any hardware platform that meets the minimum specifications that the end customer decides to deploy?
A. Cisco Video Communications
B. Cisco TelePresence Management Suite
C. Cisco Digital Media Manager
D. Cisco TelePresence Management Switch
E. Cisco Unified Communications Manager
Correct Answer: B

QUESTION 3
Which statement is correct regarding Media Redundancy Protocol (MRP) in a ring of ProfiNET devices? 200-105 dumps
A. When a link fault is detected, MRP rings must converge in less than 100 milliseconds
B. MRP defines two device roles, Media Redundancy Master and Media Redundancy Client
C. MRP can support rings of up to 250 devices
D. MRP is only supported on network switches
Correct Answer: B

QUESTION 4
A shutdown in the cookie cutter machine was traced to a broken network cable. What are two reasons that explain why using DLR is an appropriate choice for network resiliency? (Choose two)
A. DLR is designed for single network operation at the machine level
B. Moving to a linear topology will reduce the number of cables and so reduce risk of cable failure
C. DLR is the only resiliency technology that is supported by CIP Safety
D. Layer 2 resiliency protocols like REP and RSTP do not have a fast enough convergence time for motion control
E. Half of the network traffic goes clockwise on the ring and the other half counterclockwise, reducing by 50% the impact of cable failure
Correct Answer: A,D

QUESTION 5
Which two issues does utilizing an IP network storage solution for IP video surveillance help overcome? (Choose two.)
A. analog to IP conversion
B. large, expandable storage space
C. physical security
D. scalability
E. faster bit rate for storage
Correct Answer: BD

QUESTION 6
A sporting goods manufacturer has decided to network three (3) locations to improve efficiency in inventory control. The routers have been named to reflect the location: Boston, Frankfurt, and Lancaster.
The necessary networking has been completed at each location, and the routers have been configured with single area OSPF as the routing protocol. The Boston router was recently installed but connectivity is not complete because of incomplete routing tables.
Identify and correct any problem you see in the configuration.
Note: The OSPF process must be configured to allow interfaces in specific subnets to participate in the routing process.

Correct Answer: The question mentioned Boston router was not configured correctly or incomplete so we should check this router first. Click on Host B to access the command line interface (CLI) of Boston router.

QUESTION 7
Refer to the exhibit. 200-105 dumps

Why has this switch not been elected the root bridge for VLAN1?
A. It has more than one interface that is connected to the root network segment.
B. It is running RSTP while the elected root bridge is running 802.1d spanning tree.
C. It has a higher MAC address than the elected root bridge.
D. It has a higher bridge ID than the elected root bridge.
Correct Answer: D

QUESTION 8
What must be done for Cisco WLC and Cisco WCS to communicate?
A. The IP address and subnet mask of the Cisco WLC must be configured in the Cisco WCS.
B. The IP address and subnet mask of the Cisco WCS must be configured in the Cisco WLC.
C. The identity certificate of the Cisco WLC must be added to the Cisco WCS.
D. The Cisco WLC and Cisco WCS must exchange identity certificates.
Correct Answer: A

QUESTION 9
What can be done to increase the security in depth in an industrial zone?
A. Add additional disk storage to the IDS server
B. Add specific SCADA signatures to the IDS server
C. Create a high availability solution for the IDS server
D. Place a ‘data diode’ in front of the IDS server
Correct Answer: B

QUESTION 10
During the deployment of a wireless network for data and location services, an engineer is to fine-tune the location services. What is this type of survey called?
A. passive fingerprinting
B. passive calibrating
C. active fingerprinting
D. active calibrating
Correct Answer: A

QUESTION 11
Which of these devices require configuration in order for an endpoint to initiate a Multiway conference? 200-105 dumps
A. endpoint only
B. Cisco TelePresence Video Communications Server only
C. multipoint control unit only
D. endpoint and multipoint control unit only
E. endpoint and Cisco TelePresence Video Communications Server only
F. endpoint, Cisco TelePresence Video Communications Server, and multipoint control unit
Correct Answer: F

QUESTION 12
When dialing, in a format that is consistent for all users of a system, a user who has multiple TelePresence video devices associated, what are the three minimum requirements that must be configured for the user to be able to receive video calls? (Choose three.)
A. The Active Directory server must be installed.
B. Ensure that the Cisco TelePresence Video Communications Server has the FindMe option key installed.
C. Ensure that FindMe is set to on.
D. The NTP server must be set up.
E. The Cisco TelePresence Management Suite must be installed.
Correct Answer: BCE

Reference: https://www.leads4pass.com/200-105.html dumps exam questions and answers free update/

Watch the video to learn more: https://youtu.be/hZ-2ufhcg6s